D-Tap (P-Tap) Power cable for the new Pocket 4K Camera from BMD. | AlvinTap (Protective DTap): It can prevent your device from short circuits caused by reverse insertion or using an incompatible cable, which will avoid damaging your device. Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. When D-tap is inserted correctly, green light is always on, which means power on. When reverse insertion, power will be cut and the red light will flicker. | Plug A: 2 Pin Female; Plug B: D-tap with indicator light. | Cable Length:19.7 inches (About 50cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.

D-Tap (P-Tap) Power cable for the new Pocket 4K Camera from BMD. | Plug A: 2 Pin Female. | Plug B: Standard Male D-Tap. | Cable Length:1m (about 39 inches) in stock. We can customize cables with other length, please send a message to us if you need. | The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.

Super flexible and thin 3G HD SDI Cable, 75 Ohm | For Blackmagic BMCC Video Camera. Be able to transfer 4K from Sony FS5 to Atomos Shogun Inferno. | Connector type: Straight BNC male to Straight BNC male. | Cable Length:50CM. We can customize cables with other length, please contact us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement. | This cable is SMPTE Time Code in. | BNC connector in one end and a Right Angle 5 pin male in the other end You could go from your lockit box to BNC connector to 5 pin ( right angled ) to the Alexa mini Timecode input. ( About the detail, please contact me ) | Compatible with many audio recorders and cameras (Sound Devices, AATON, Red, ALEXA, etc...) | Cable Length:1M ( 39 inches ). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order.

For Panasonic DMC-GH5 GH4 GH3. | Enable you to charge cameras powered by DMW-DCC12 with an external high capacity V-mount or Gold mount batteries. | Largely prolong camera shooting hours or devices service time. | Cable Length: The max length is 35.4 inches (90cm). | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector. | Power Cable for Moza air 2 to BMPCC 4k | Cable length：Min length 12 inches,Max length 36 inches | Male DC barrel fits both 5.5 x 2.5mm and 5.5 x 2.1mm female DC ports | Plug A: 2 Pin Female. Plug B: DC Male

The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector. | Power Cable for Blackmagic pocket cinema camera 4k | Male DC barrel fits both 5.5 x 2.5mm and 5.5 x 2.1mm female DC ports | Cable Length: 3 foot (90cm),22 AWG | Plug A: 2 pin Female. Plug B: DC male

Power your Teradek Bolt, Z-CAM E2 Flagship Series Cameras (E2-S6, E2-F6, E2-F8) from 12V DC output battery plate | Plug A: Right Angle 2 Pin Male. | Plug B: Right Angle DC male. | Cable Length:45cm (about 18in) in stock. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Normally to power Blackmagic's cinema camera 4k, Sound Devices 633/644/688, ZOOM F8 recorder. | Can also be used to power DC 2.1 or 2.5mm lights such as Litepanels. | Cable Length:45cm/18 inches. We can customize cables with other length, please send a message to us before making the order. | Plug A: Right Angle DC. Plug B: Hirose 4 Pin Male. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | This 75ohm RG179 HD SDI Cable works for your Blackmagic. | Plug A: DIN 1.0/2.3 Right Angle. | Plug B:Right Angle BNC Male. | Cable Length: 30CM. We can customize cables with other length, please send a message to us if you need.

Enable you to charge cameras powered by DMW-DCC12 with an external high capacity V-mount or Gold mount batteries. | Compatible with Panasonic DMC-GH5/GH4/GH3. | Cable length: 1.6m; the cable length is manually measured, there may be an error of 1-5cm! | Please Note: Because the Gold Mount Battery (Or same type battery) voltage output cannot reduce when the capacity of battery decreases, it will not give indication of the current charge level status of the battery, but if you use NPF970 battery to power it, it will be ok.

D-tap splitter hub allows you to power multiple cameras and devices at the same time from V-Mount, Gold-Mount Battery or other power source with D-tap output. Featuring d-tap female sockets of different directions, the cable allows you to change the direction of dtap. | The cable comes with a 1/4" screw, making it easily and firmly mounted on your camera rigs or device. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Cable Length: 15.7 inches (40cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

With this PowerTap Receptacle,you can expand any Power Tap to accommodate up to four separate,Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. | Cable Length: 27.6 inches (70 cm). We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Every item will be sold until they were tested and turned out to be no short circuit, no latent breakdown problems. If the cable you received is defective, please contact us immediately.

Two-way pluggable: D-tap adopts a 3x4 port design, no matter from the front or the reverse direction, the device can be quickly plugged into the socket. | With extra 2 DC output (8V and 12V) for more camera monitors, led lights, and other DC devices. USB 5V-2.1A output can also supply power for cell phones or other devices. | Cable Length: 4.3inches (11cm), max stretched up to 39inches (100cm). | Plug A: D-tap Male Connector. Plug B: 4 Port D-tap Female Connector. Plug C: USB 5V/2.1A. Plug D: DC 8V. Plug E: DC 12V. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

This ultrashort D-tap splitter power cable is perfect for saving room during your shooting and avoiding too messy condition, which is convenient for your shooting. | With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate D-tap. Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. | At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power your RED Komodo-X. Epic, Scarlet, RED DSMC2, DSMC3, V-Raptor camera with battery with D-tap power output. This cable is not for RED Komodo and RED V-raptor XL. | Plug A: D-tap Male. | Plug B: Straight 1B 6 Pin (4+2) Female. | Cable Length:1m (about 39in) in stock. We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power your Teradek Bond/ Teradek Bolt/ SmallHD Monitor from a PowerTap power source. | Plug A: Standard Male D-Tap | Plug B: 0B 2 Pin Male Right Angle Connector. | Cable Length: 45CM/18inches. We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

With this adapter cable, you can power NP-F550, NP-F570, NP-F970 Monitor from a V-mount battery with D-tap. This adapter is an upgraded version which can be used for Atomos Ninja V Monitor. | There is a 7.4v DC output which allows you to power other devices at the same time. | Input: 10V-24V; Output: 8V. Cable Length: 1.5M/59inches. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Plug A: NP-F550 Dummy Battery (upgraded). Plug B: D-tap Male. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

For Smallhd 702 touch monitor, Atomos Ninja V, Atomos Shogun, Lectrosonics venue VR IFB, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Hollyland Mars 400s. | Plug A: D-tap Male. | Plug B: Right Angle Locking DC, be compatible with 2.1*5.5mm or 2.5*5.5mm. | Cable Length: 60CM. We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Power Adapter Cable for Sony NP-F550, NP-F570, NP-F970, Atomos Shinobi, Atomos Ninja V Monitor, SmallHD Focus 7 from a V-mount battery. | Input Voltage: 12V - 24V; Output Voltage: 8.2V (stabilized); Output Current: 4.5A (maximum). | Avoiding Reverse Insertion. Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. | Plug A: NP-F550 Dummy Battery. Plug B: D-tap. Unstretched Length:40cm, Stretched Length: 80cm. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

This is for Teradek Bolt/ Teradek Bolt/ Teradek Ace 800/SmallHD 703 503/ Vaxis wireless(Please note:this one isn't for Bartech Focus Device Receiver,if you need the one for Bartech Focus Device Receiver,please visit my store or contact me, thanks!) | More flexible and thinner than normal cables. | Plug A: Standard Male D-Tap; Plug B: 2 Pin Male Connector. | Cable Length: 23.6 inches(60cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

This twisted GigE cable is used for data transmission and comes outfitted with two RJ45 plugs, one with horizontal screw-downs. | The cable is suitable for drag chain applications. | Cable Length: 5M. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

75 Ohm 3G HD SDI Cable. | For Sony/ Blackmagic Camera, Aotmos Monitor. | Plug A: Right Angle BNC male; Plug B: Straight BNC male. | Cable Length: 30CM(12 inches). We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

This SDI Cable is a 75 ohm coaxial cable complete with two male BNC connectors designed to support the transfer of both RF and video signals, particularly HD quality video signals. The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Length: 100cm (custom length) | Resistance: 75Ω,Frequency: 0~2GHz | Shelter: double shelter, aluminium-foil paper+internal copper net | Connector type: BNC male to BNC male

For Basler GIGE AVT CCD Camera. | Plug A: Right angle hirose 6 pin female HR10A-7P-6S Connector C-type. | Plug B: Flying Lead. | Cable Length: 16.4ft/5M. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

High Flex 6 Pin Hirose Female HR10A-7P-6S Cable for Basler GIGE AVT CCD Camera | Plug A: HR10A-7P-6S Hirose 6 Pin Female. | Plug B: Flying lead. | Cable Length: 10m (32.8ft). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

High Flex 6 Pin Hirose Female HR10A-7P-6S Cable for Basler GIGE AVT CCD Camera | Cable Length: 10M/32.8ft. We can customize cables with other length, please send a message to us before making the order. | Plug A: HR10A-7P-6S connector right angle C-Type | Plug B: Flying lead | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Fully compatible with Red Scarlet W DSMC 2. | Plug A: Right Angle 16 Pin Male; Plug B: Right Angle 16 Pin Male. | We offer one year warranty for defective units. | Cable Length:60CM end to end (about 24in) in stock. We can customize cables with other length, please contact us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

For Smallhd 702 touch monitor, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Hollyland Mars 400s. | Plug A: D-tap Male. | Plug B: Locking DC 5.5x2.1mm. | Cable Length:15cm/Stretch 80cm. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

For Canon 5D4 5DSR 5D2 5D3 6D 60D R6 7D 7D2 70D 80D. Please note, it can't be used for Blackmagic camera, please don't use it for the others that we do not mention. This is dummy battery cable, not LP E6 real lithium battery , the appearance is different from the LP E6 real lithium battery, we could call it DR E6 dummy battery too, but it will work for the device we mentioned above (About the detail, welcome to contact us) | Cable length：Min length 12 inches, Max length 36 inches. | Please ensure that the output of the power source does not exceed 16.8V.The Output is about 8V. Please Note , this is the correct installation steps, it is good for your device and dummy battery cable: Firstly plug the D-Tap into the battery, then load the dummy battery into the battery compartment, and finally turn on your device. | Plug A: LP E6 Dummy Battery (DR E6); Plug B: D-tap. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

For Blackmagic Video Assist 5" 12G HDR. | Plug A: Original Right Angle Micro BNC High Density BNC. | Plug B: BNC Male. | Cable Length: 50CM|19 inches. We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

With this adapter cable, you can power NP-F550, NP-F570, NP-F970 Monitor from a V-mount battery with D-tap. This adapter is an upgraded version which can be used for Atomos Ninja V Monitor. | Input: 10V-24V; Output: 8V. | Cable Length: Min length is 15 inches, Max length is 43 inches. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Plug A: NP-F550 Dummy Battery (upgraded). Plug B: D-tap Male. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Power Adapter Cable for Sony NP-F550, NP-F570, NP-F970 Monitor, Atomos Shinobi, Atomos Ninja Monitor, SmallHD Focus 7 from a V-mount battery d-tap | Input Voltage: 12V - 24V; Output Voltage: 8.2V (stabilized); Output Current: 4.5A (maximum). | Avoiding Reverse Insertion. Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. | Plug A: NP-F550 Dummy Battery. Plug B: D-tap. Cable Length: 86cm. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

Power Adapter Cable for Sony A7III A7RIII A7SIII A9 ILCE-9 FX3 A7C A7IV Camera. | Work with Sony battery and v-mount battery with D-tap output. | Cable Length：Min length is 30cm, Max length is 90cm. | Input:10V-20V; Output: 7.6V/2A. | Plug A: NP-FZ100 Dummy Battery; Plug B: D-tap.

Power Adapter Cable for Sony A7III A7RIII A7SIII A9 ILCE-9 FX3 Camera. | Work with Sony battery and Anton battery with D-tap output. | Cable Length：1M, We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Input:10V-20V; Output: 7.6V/2A. | Plug A: NP-FZ100 Dummy Battery; Plug B: D-tap.

Power Cable for Tilta Nucleus M from Steadicam Rigs or Arri RED Camera 2 Pin | Cable Length: 27.6 Inches (70CM).We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Plug A: 2 Pin Male. Plug B: Nucleus 7 Pin Male. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. | Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Power your Odyssey 7 or 7Q+ Monitor. | Plug A: D-tap Male Connector.Plug B: Original NSC3F 3pin Female Connector. | Cable Length (Spring Length): 0.2 meter in stock. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | Please contact us if the cable doesn't work. We will solve the problems properly or send you a new replacement at once.

This 4 Pin Female to Dtap Power Cable for Portkeys BM5 / BM7 Monitor. | Plug A: Right Angle 4 Pin Female. | Plug B: Dtap Male. | Cable length: 15.75 inches (About 40cm).Custom Length: other length of the cables, we could customize with it, please contact us. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Female D-Tap P-Tap Connector Plug for DSLR Power Gold Mount V Mount Battery, LED Light, HD Monitor or other devoice. (You can use this adapter and your lemo 2pin to D-tap male cable to power Z CAM E2 K2/ ARRI/ RED Camera/ Teradek Cube/ Hollyland Cosmo 600, if you want to use it to other device, please contact us to confirm first ) | We only use highly reliable and safe chips in our adapters to protect your devices, insteading of using low-quality chips to reduce costs. | With 4 plugs (UK, US, EU, AU), you can change it easily by yourself. | Cable Length: 79 inches (2 meters). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

This rotatable right angle 2 pin to AC Adapter Cable is for use with the Hollyland RX, Hollyland TX ,Teradek Cube, Bolt, Bond, Link and Z CAM E2 Flagship (E2-F6, E2-S6, E2-F8), if you want to use it for other devices, please contact us to confirm first. | We only use highly reliable and safe chips in our adapters to protect your devices, insteading of using low-quality chips to reduce costs. | With 4 plugs (US, UK, EU, AU), you can change it easily by yourself. | Cable Length: 79 inches| 2meter. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.