Every cable was tested to ensure that there are no short circuit ,no potential breakdown problems before shipping, and it works great! | Power your Teradek Bond cellular bonding solution from a PowerTap power source (it is for ARRI RED Paralinx Preston Transvideo Offhollywood Switronix Panasonic too) | Cable Length:45cm (about 18in) in stock. | Custom Length: Other length of the cables,we could customize with it,please remark words or contact with me | Plug A: Standard Male D-Tap; Plug B: 2 Pin 0B Male Connector.

Video Devices PIX-E7 7 touchscreen display power Cable Anton Bauer Power Tap D-Tap to 2.1*5.5mm lock DC, Hollyland Mars 400s. | Cable Length: 2 meters. We can customize cables with other length, please send a message to us if you need. | Plug A: D-tap Male. | Plug B: Locking DC 2.1. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Super flexible and thin 3G HD SDI Cable. | Cable Length:60cm (about 24in) in stock. We can customize cables with other length, please send a message to us if you need. | Connector type: Right angle BNC male to Right angle BNC male. | 75 ohm

Video Devices PIX-E7 7 touchscreen display power Cable Anton Bauer Power Tap D-Tap to 2.1*5.5mm lock DC, Hollyland Mars 400s. | Cable Length:21cm/Stretch 100cm. We can customize cables with other length, please send a message to us if you need. | Plug A: D-tap Male. | Plug B: Locking DC, be compatible with 5.5 *2.1mm and 5.5*2.5mm. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Min length: (14cm +12cm +12cm), (Max length: 50cm +12cm +12 cm) | Plug A: Right angle BNC male, Plug B: Right angle BNC male

This LanParte SDI Cable is a 75 ohm coaxial cable complete with one right angle male BNC connector and one straight male BNC designed to support the transfer of both RF and video signals, particularly HD quality video signals. | The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Cables Length: 50cm (custom length) (15CM,20CM,1M are also available, please send a message to us if you need.) | Shelter: Double shelter, aluminium-foil paper+internal copper net. | Resistance: 75Ω, - Frequency: 0~2GHz.

This LanParte SDI Cable is a 75 ohm coaxial cable complete with two male BNC connectors designed to support the transfer of both RF and video signals, particularly HD quality video signals. The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Cable Length: 60cm. We can customize cables with other length, please send a message to us if you need. | Resistance: 75Ω, Frequency: 0~2GHz. | Shelter: double shelter, aluminium-foil paper+internal copper net | Connector type: BNC male to BNC male.

Connector type: Right angle BNC male to right angle BNC male. | Cable Length: 50cm (custom length) (15CM, 60CM is available, if you need, please contact me) | Shelter: Double shelter, aluminium-foil paper+internal copper net. | Resistance: 75Ω; Frequency: 0~2GHz. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

This SDI Cable is a 75 ohm coaxial cable, ending with two original Neutrik BNC male connectors which is designed to support the transfer of both RF and video signals, particularly HD quality video signals. The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Color: Red.Plug A: Right angle original BNC Male; Plug B: Right angle original BNC Male. | Cable Length: 3.28Ft/ 1M. We can customize cables with other length/ color, if you need custom cables, please send a message to us before placing the order. | Connector Cover: AL, Shelter: double shelter, aluminium-foil paper+internal copper net, Resistance: 75Ω, Frequency: 0~2GHz. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

The cable and connectors are all from premium brand, so you can trust in its quality. In addition, both connectors and cable support 12G, enabling long-distance transmission. | For Blackmagic Video Assist 5" 12G HDR. | Plug A: Straight Micro BNC Male; Plug B: Straight BNC Male. | Cable Length: 50CM(19.7inches). We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

More flexible and thinner than normal cables | This is for Teradek or SmallHD (Please note this one isn't for Bartech Focus Device Receiver, if you need it, please visit my store or contact me,thanks!) . | Plug A: Standard Male D-Tap , Plug B: Right Angle 0B 2 Pin Male Connector. | Cable Length: 60cm(23.6inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

This ethernet cable is for remote control or data update. | Connects the 10 pin plug to ALEXA MINI LF/ ALEXA LF/ ALEXA MINI/ ALEXA SXT Camera. | Plug A: Straight 1B 10 Pin Male; Plug B: Standard RJ45 | Cable Length: 54cm( 21.3 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

This DIN to BNC Cable features light weight, high temperature resistance, moisture resistance, corrosion resistance, anti-electromagnetic interference, good flexibility and so on. Support transfer to both RF and video signals, particularly HD quality video signals. | Compatible with Blackmagic Design Video Assist HyperDeck Shuttle DeckLink Quad. Thinner and more flexible. | Plug A: DIN 1.0/2.3 Mini BNC . Plug B: BNC Male. | Cable Length: 60cm (23.6inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

With one 1/4’’and one 1/6’’ screw threads, you can mount the splitter box on Ronin 2. When the splitter box is fixed, it is more convenient for you to shoot. | The outer casing of splitter box is all made of aluminum, which largely promotes the durability and stability of this cable. | With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate P-taps, Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. | Plug A: D-tap Male Connector; Plug B: 3 Port D-tap Female Connector. Cable Length:19.7 inches (50 cm). We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking.

With one 1/4’’and one 1/6’’ screw threads, you can mount the splitter box on Ronin 2. When the splitter box is fixed, it is more convenient for you to shoot. | The outer casing of splitter box is all made of aluminum, which largely promotes the durability and stability of this cable. | With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate P-taps, Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. | Plug A: D-tap Male Connector; Plug B: 3 Port D-tap Female Connector. Unstretched Length:19.7 inches (50 cm). Stretched Lengt: 39.4inches(1M). We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking.

With one 1/4’’and one M4 screw threads, you can mount the splitter box on Ronin 2. When the splitter box is fixed, it is more convenient for you to shoot. | The outer casing of splitter box is all made of aluminum, which largely promotes the durability and stability of this cable. | With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate P-taps, Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. | Plug A: D-tap Male Connector; Plug B: 3 Port D-tap Female Connector. Cable Length:19.7 inches (50 cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking.

With one 1/4’’and one 1/6’’ screw threads, you can mount the splitter box on Ronin 2. When the splitter box is fixed, it is more convenient for you to shoot. | The outer casing of splitter box is all made of aluminum, which largely promotes the durability and stability of this cable. | With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate P-taps, Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. | Color: Blue. Plug A: D-tap Male Connector; Plug B: 3 Port D-tap Female Connector. Cable Length:19.7 inches (50 cm). We can customize cables with other length, please send a message to us if you need. | At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking.

【Compatible Devices】Compatible with Atomos Ninja V/ Atomos Shogun/ SmallHD 702/ Feelworld monitor, Hollyland Mars Wireless Transmitter Receiver. | 【Multiple Power Supply】This pass-through NP-F550 dummy battery adapter cable is designed to power monitor and wireless transmitter/receiver at the same time via one V-mount battery via D-tap. With a type-c usb-c port which supports PD function, it also allows to power one more device. | 【Increase Portability】Without using two power cables, It makes the devices more tidy and easier to move during shooting. Besides, the two devices can be mounted securely on the NP-F dummy battery. | 【Safe and Stable】Built-in input and output reverse, high voltage, overload protection circuit. Input voltage: 9-20V; Output voltage of NP-F dummy battery: 8V 8A (double-sided power share); Output voltage of Type-c: 5V 3A/ 9V 2A/ 12V 1.5A. | Unstretched length: 30cm| 12inches, stretched length: 60cm|24inches. Plug A: D-tap Male. Plug B: NP-F Dummy Battery.

【Compatible Device】For Canon R5C. It does not support 8K 60P auto focus, but support 8K 30P auto focus. Please note that do not use this dummy battery on the SmallHD or Blackmagic camera, do not use it for the others that we do not mention. (About the other details, welcome to contact us) | 【Connectors】Plug A: E6 Dummy Battery; Plug B: D-tap. | 【Note】Please ensure that the output of the power source does not exceed 16.8V. The output is about 8V. Please follow the below installation steps, which is better for your device and dummy battery cable: Firstly, plug the D-Tap into the battery, then load the dummy battery into the battery compartment, and finally turn on your device. | 【Cable Length】Cable Length: 30cm (12 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | 【Excellent Service】Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

This cable is to power Red Komodo Cinema Camera from a V-mount or Gold mount battery with D-Tap output. | This cable is more flexible and softer than regular version, making it easier to adapt the cable to device layouts. | Plug A: Rotatable right angle 2 pin female; Plug B: D-tap male connector. | Cable Length: 80cm (31.5 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power Nucleus M from Z Cam E2 Flagship E2-S6 E2-F6 E2-F8 Camera. | Plug A: Right Angle adjustable 2 Pin Male. | Plug B: Nucleus M 7 Pin Male. | Cable Length: 50CM (19.7inches). We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

With this cable, you can power RED KOMODO Cinema Camera from a V-mount or Gold mount battery with D-tap output. | Alvin's Rotatable Right Angle Plug can be rotated at any 45 degrees (0/45/90/135/180/225/270/315), and the default direction is 12 o'clock (0 degrees). Please note, before rotating, you need to unlock the nut first, if you don't know how to do, please contact us. | Plug A: Rotatable Right Angle 2 Pin Female. Plug B: D-tap Male. | Length before stretching: 14 inches (35cm); Max stretch to: 28 inches (70cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

This is a SDI-Port-Protection-Cable to prevent users from damaging the SDI port due to incorrect operational procedures. | Intimate double-angled plugs design makes the cable exits from the side, so as not to block other jacks, making your device more concise. | Please note, that SDI isolators can reduce signal quality and/or maximum cable length. This cable is transmitted via frenquency, which can block the current of the shielding layer, and protect against SDI damage. And generally, when the signal is reduced, it can only transmit in 2K(1080p), and cannot be used for transmission in 4K/8K . | Plug A: Right Angle BNC Male. Plug B: Right Angle BNC Female with SDI Protector. | Cable length: 8inches/ 20cm. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order.

For Canon R5C. Sync Timecode from Timecode Generator or other devices with BNC SDI output port to R5C. | Connects BNC to Timecode Generator and connects DIN to R5C. | Plug A: Straight DIN Male; Plug B: Straight BNC Male. | Cable Length: 30cm (12 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Designed to fit all standard 12-pin auxiliary connectors on Hitachi and Sony Cameras, as well as most other industry standard cameras that use a 12-pin connection. | Cable Length:3M (about 9.84 feet) in stock. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Compatible with 12 Pin Hirose Female to DC 12v Female Cable GH4 Power B4 2/3"Fujinon Nikon Canon Lens to power video lens zoom function | This cable was designed specifically to power 2/3" lenses (B4) mounted on Panasonic AF100, GH1, GH2, GH3, GH4, Olympus PEN, OM-D EM-5, Sony NEX and other digital Cameras, however it will power all types listed below. | Powers any 1/3" 1/2" 2/3" Fujinon Nikon Canon Angenieux Schneider B4 lens Servo having a Hirose 12 Pin Male connector: | Source power from a 12v battery or AC to DC 12v Power Supply (DC 5.5x2.1mm connector). Provides power to the Zoom Servo functions including (Fujinon) Quick Zoom, Cruise Zoom & Memory Functions. Provides power Iris return. | Auto Iris will not function as that is a function that requires a handshake from the camera to lens which this cable cannot provide. Solid Construction. Over-molding on both ends. 12" (30cm) length.(we can customize)

[More Durable] Made of Highly-Foamed PE Insulation, making the transmission performance more stable and the life expectancy largely increased. | [Wide Compatibility] This cable is compatible for Blackmagic, AJA, SmallHD, Grass Valley, Evertz, Marshall, RED, Cobalt Digital, Atomos, Postium, AVID, Decimator, Sony, Teradek and so on. | [Connectors] Plug A: Original premium BNC Male. Plug B: Original premium BNC Male. | [Length] Cable Length: 1m (39.7 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | [Warranty]Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once. | This SDI Cable is a 75 ohm coaxial cable complete with two male original BNC connectors designed to support the transfer of both RF and video signals, particularly HD quality video signals. The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Connector type: Original BNC male to BNC male, black color. | Cable Length: 1 meter. We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | Connector cover: AL, Shelter: double shelter, aluminium-foil paper+internal copper net, Resistance: 75Ω, Frequency: 0~2GHz

This 3.5mm to BNC cable is to feed timecode signal from a Deity TC-1/ Tentacle Sync E mkII Timecode box generator to various cameras and devices (for Canon C70/C300 MK II/ C300 MK III/ C500, Sony F55/ FX9/ FX6 cameras, Zaxcom, Zoom F4/ F8/ F8n/ F8n Pro, Sound Devices, Blackmagic Ursa Mini, JVC broadcast cameras, for Panasonic broadcast cameras.) | This cable can also feed timecode out from BNC to 3.5mm TRS. | Plug A: Right Angle BNC Male connector. Plug B: Right Angle Lock 3.5mm TRS Connector. | Cable Length: 50cm (19.7 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Generally it is used to power cameras like Blackmagic's cinema camera/4k as well as DC 2.5mm lights such as Litepanels. | Plug A: Hirose 4 Pin Male Right Angle; Plug B: DC Jack Central Positive. | This cable is not compatible with BM Pocket. | Cable Length: 45CM. We can customize cables with other length, please contact us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Used normally to power Cameras like Blackmagic's Cinema camera/4k. Can also be used to power DC 2.5 or 2.1mm lights such as Litepanels. | Cable Length: Max length 31.5 inches. | Plug A: Hirose Right Angle 4 Pin Male; Plug B: DC Jack Centre Positive. | Be compatible with Blackmagic cinema/4k (Not for BM Pocket use). | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

【Adjustable Screw Spacing】Based on feedback on the screw spacing, we made adjustments. The screw spacing of upgraded box can be adjusted between 15mm-18mm, compatible with more devices. | 【Efficient and Convenient】This mini splitter converts one 0B 2 pin female input port to three 2 pin female output ports, being able to supply power to three devices at the same time. With two 1/4" screws, the splitter box can be mount on a camera, Steadicam, gimbal, etc., which makes shooting more convenient. | 【Strong Compatibility】It is for SmallHD Cine7 monitor, Teradek 500xt, a Teradek MDR.X with MOTR.X, camera accessories, Tilta accessories, camera monitor, EVF, wireless video transmission equipment, audio recorder etc. | 【Compatible Cable】You can use all 0B 2 pin power cables, and it will work better with Alvin's rotatable right angle 2-pin which is not limited by the red dot position. | 【Details】Plug A: 0B 2 pin female (Input). Plug B: Three 0B 2 pin female (Output). Material: Solid Aluminum. Output: 2A max at 14.8V (there is no fuse and voltage regulator).

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement. | Plug A and B：6 pin hirose male | Cable Length:1M, we can customize cables with other length, if you need custom cables, please send a message to us before placing the order.

Wider Compatibility: It works with Atomos Ninja V @ 4K / 60fps. It can record 4K 60 fps on Z-CAM or C70 to Ninja-V Monitor, no frame drop. It also works with 8K TV and Sony A7S3,A9,A74 and so on. | Perfect Size: Featuring 18 to 28 inches braided coiled cable, the perfect length for your film pro cameras and monitor combinations, this cable helps to keep your filming environment neat when connecting your camera to monitor, in addition, it avoids the situation of twinning with other cables. | Cable Length: Min length 18 Inches (6in+6in+6in),Max length: 28 Inches, we can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Connectors: Plug A: Full HDMI, Plug B: Full HDMI. | Safety and Service Assurance: Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

Wider Compatibility: It works with Atomos Ninja V @ 4K / 60fps. It can record 4K 60 fps on Z-CAM or C70 to Ninja-V Monitor, no frame drop. It also works with 8K TV and Sony A7S3,A9,A74 and so on. | Perfect Size: Featuring 18 to 28 inches braided coiled cable, the perfect length for your film pro cameras and monitor combinations, this cable helps to keep your filming environment neat when connecting your camera to monitor, in addition, it avoids the situation of twinning with other cables. | Cable Length: Min length 18 Inches (6in+6in+6in),Max length: 28 Inches, we can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Connectors: Plug A: Full HDMI, Plug B: Full HDMI. Color: Black | Safety and Service Assurance: Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement. | PRO DC Power Adapter With 4 Pin Male HIROSE Connector 110 VOLT AC TO 12 VOLT DC. | Cable Length:1.5m(we can customize ,if you need other length, please remark words or contact me).

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | Power your ALEXA MINI Camera with battery that with D-tap power output plug. | Works with ALEXA MINI Camera. | Cable Length:100cm (about 39in) in stock. We can customize cables with other length, please send a message to us if you need. | Plug A: 2B Right Angle 8 Pin Female; Plug B: D-tap Male.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once. | Audio cable for your ARRI Mini. This one isn't for Sennheiser MKE600r, if you want to use for Sennheiser MKE600r, please contact us, we can customize it for you. | Cable Length:1 meter in stock. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Plug A: Right Angle 5 Pin 00 Male Connector. | Plug B: Right Angle 3.5mm TRS.

Audio cable for your ARRI Mini LF. | Plug A: 6 Pin Male Connector. | Plug B: Right Angle 3.5mm TRS. | Cable Length:20 inches (50 cm) in stock. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Connector type: Right angle BNC male to right angle BNC male. | Shelter: Double shelter, aluminium-foil paper+internal copper net. | Resistance: 75Ω; Frequency: 0~2GHz. | Cable Length: 30CM. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.