this product mainly used to solve connection problem caused by insufficient wiring.through physical separation method,one-divided-two for cable is achieved and two devices online can be realized simultaneousy.this product differs from tee,which cannot realixe simultaneouslyonline for both devices.
solve problem of embedding isufficiemt of wiring engineer cable,and realixe one-divided-two for cable.
this deconcentrator is divided existing embedded cable(8 cores) into twogroups(1236/4578) and rtansmitting data separatey. It belongs to purely physical connections,without functions of distributing IP address so it can not be equal to routers or switches.
Each group sub-lines(1 and 2) can reach 100 megabytes per unit respectively and two sets of signals are transmittedwithout interference, which shall be usedin a pair during istallation.Only NO.2 Port can be used when single one is used.
1.Household applications/NO.1 :
Enable IPTV and rouersbe online at the same time,if there is just one cable from weakelectricity box to living room in decoration,while the router placed in weak electricity box and its signal is relatively weak,the routercan be moved to the center of living roomthrough following methodand the router's signal will become much better.
2.Taking routers as loop and transmitsignalasto other devices,if only one ussis left in modem while two rooms are fitted with cables and only one room is equipped with routers,at this time online at another room can be realized by two deconcentrators
3.Engineering approach/NO.1
Connecting two online sets by one cable if your office has already covered a cable and only has one USB,but you want to realize two computers online (or other network devices)at the same time,source must have two USBs
4.Connecting two POE monitors by one cable simultaneously for POE devices of remote transmission