Built with original Intel I350 Gigabit Ethernet Controller chip, enables customers to take full advantage of 1GbE. Compare to Intel I350-T4(NOTE: DON'T SUPPORT LINK AGGREGATION IN WIN10.). | Low Profile & Full Height brackets. PCI Express* 2.1. 5 GT/s x4 Lane. Compatible with x4, x8, x16 standard (except x1 slots) and low-profile PCI Express* slots. | Quad 10/100/1000Mbps RJ45 ports which can support cat5 cable up to 100m. Support Link Aggregation (support Link Aggregation for Win10). Transmission Rate Per Port: 10/100/1000Mbps. | Supported Operating Systems: Windows Server 2003/2008/2012/2016, Windows7/8/10/Vista/XP, Linux, VMware ESX/ESXi*. | Easy installation, a driver disk is included in the package or you can download the driver from Intel website.

Fiber Port: 1.25G, SC, 850-nm | Fiber Type: MMF, Dual SC | RJ-45 Port: 1 port 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover | Cable Type: UTP/STP Cat.5e for 100 meters | Power Supply: 5V-1A, UL Certified

Data Rate: 1.25Gb/s | Wavelength: 1310-nm | Reach: up to 10 km; Fiber Type: Dual LC single-mode fiber | Compatible with Cisco GLC-LH-SMD/GLC-LH-SM/SFP-GE-L, Meraki MA-SFP-1GB-LX10, Ubiquiti UF-SM-1G, Mikrotik, Fortinet, TP-Link TL-SM311LS

Data Rate: 1.25Gb/s | Wavelength: 1310-nm | Reach: up to 10 km | Fiber Type: Dual LC single-mode fiber | Compatible with Intel

Data Rate: 1.25Gb/s | Interface: RJ-45; Cable Type: CAT.5e | Reach: up to 100 meters transmission over CAT.5e | Compatible with Netgear AGM734, Ubiquiti UF-RJ45-1G, D-Link, Supermicro, TP-Link, Broadcom

Data Rate: 1.25Gb/s | Interface: RJ-45; Cable Type: CAT.5e | Reach: up to 100 meters transmission over CAT.5e | Compatible with Ubiquiti UF-SM-1G

Data Rate: 100/1000M/2.5Gb | Interface: RJ-45 | Reach: up to 100 meters transmission over CAT.5e

100GBASE-CR4 QSFP28 to QSFP28 DAC Direct Attach Copper Twinax Cable, Passive, 0.5-Meter(1.64ft), 30AWG. | Compatible with Cisco QSFP-100G-CU0.5M. | QSFP28 to QSFP28 copper direct-attach 100GBASE-CR4 cables are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of switches within racks and across adjacent racks. | In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. And each DAC Cable is individually tested on switches before delivery. | 10Gtek is a manufacturer of Direct Attach Copper Cable, custom service is available.

100GBASE QSFP28 to 4x 25G SFP28 Breakout Direct Attach Copper Twinax Cable, Passive, 2-Meter(6.5ft), 30AWG. | 100% compatible with Arista CAB-Q-4S-100G-2M. | QSFP-100G to 4x SFP-25G copper direct-attach breakout cables are suitable for very short links and offer a cost-effective way to connect within racks and across adjacent racks. These breakout cables connect to a 100G QSFP port of a Arista switch on one end and to four 25G SFP ports of a Arista switch/server on the other end. | In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. And each DAC Cable is individually tested on switches before delivery. | 10Gtek is a manufacturer of Direct Attach Copper Cable, Customized service is available.

10GbE SFP+ to SFP+ 10GBASE-AOC Active Optical Cable SFP+ assembly, 10-meter. | Widely compatible with Cisco SFP-10G-AOC5M, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices. (Coding as Cisco SFP-10-SR) | In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. Each AOC Cable is individually tested on switches before delivery. | Backed by 10Gtek 30 Days Free-returned, 1-Year Free Warranty and Lifetime Technology Support. 10Gtek offer more compatible options, if your brands not listed above, pls contact us.

10GbE SFP+ to SFP+ 10GBASE-AOC Active Optical Cable SFP+ assembly, 20-meter. | Widely compatible with Cisco SFP-10G-AOC5M, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices. (Coding as Cisco SFP-10-SR) | In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. Each AOC Cable is individually tested on switches before delivery. | Backed by 10Gtek 30 Days Free-returned, 1-Year Free Warranty and Lifetime Technology Support. 10Gtek offer more compatible options, if your brands not listed above, pls contact us.

10GbE SFP+ to SFP+ DAC direct attach copper cable, 10GBase-CU 2-pair differential twinax cable, Passive, 0.42-meter(1.4ft) | SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing | Compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test. | Backed by 10Gtek 30 Days Free-returned, 3-Year Free Warranty and Lifetime Technology Support. 10Gtek is a manufacturer of Direct Attach Copper Cable, customized sevice also is available

10GbE SFP+ to SFP+ DAC direct attach copper cable, 10GBase-CU 2-pair differential twinax cable, Passive, 6 Meter(19.7ft) | SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing | Compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test. | Backed by 10Gtek 30 Days Free-returned, 3-Year Free Warranty and Lifetime Technology Support. 10Gtek is a manufacturer of Direct Attach Copper Cable, customized sevice also is available

Data Rate: 10G | Wavelength: 1310-nm; Reach: up to 10 km | Fiber Type: Dual LC single-mode fiber | Compatible with Cisco SFP-10G-LR, Meraki MA-SFP-10GB-LR, Ubiquiti UF-SM-10G, Fortinet, Mikrotik, D-Link, Supermicro, Netgear and More

Data Rate: 10G | Wavelength: 850-nm; Reach: up to 300m | Fiber Type: Dual LC OM3/OM4 multi-mode fiber | Compatible with Juniper QFX-SFP-10GE-SR/EX-SFP-10GE-SR

Data Rate: 10G | Wavelength: 850-nm; Reach: up to 300m | Fiber Type: Dual LC OM3/OM4 multi-mode fiber | Compatible with Mikrotik S+85DLC03D

Data Rate: 10G, 10 Pack | Interface: RJ-45; Cable Type: CAT.6a/CAT7 | Reach: up to 30 meters | Wide Compatibility - for Cisco, Fortinet, Ubiquiti, Netgear, D-Link, TP-Link, Linksys, Broadcom, Edge-core, EMC, F5, Meraki, Norkia, QTC, Supermicro, and Other Open Switches.

Data Rate: 10G | Interface: RJ-45; Cable Type: CAT.6a/CAT7 | Reach: up to 30 meters | Wide Compatibility - for Cisco, Fortinet, Ubiquiti, Netgear, D-Link, TP-Link, Linksys, Broadcom, Edge-core, EMC, F5, Meraki, Norkia, QTC, Supermicro, and Other Open Switches.

[Convert Fiber to Ethernet] 10Gbps SFP+ Media Converters provide you a cost-effective, strong anti-interference ability and stable data transmission solution for network extensions (up to 10km with singlemode fiber). Designed to convert 10GBASE-Tx copper to 10GBase-LR fiber media or vice versa. | [Smart Management] 1x Single-mode Dual LC fiber Optical Port, 10Gbps, 1310nm wavelength, support 10Gigabit Ethernet, extend fiber distance to 10km; 1x RJ45 Port: 10Gbps, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover. | [High-quality and Widely Compatibility] Equiped with RTL8213B chip to ensure stability and Ultra-low time-delay data transmission. Low power consumption(less than 5watt) and low EMI emission design. Complies with IEEE 802.3/802.3u/802.3z/802.3ab/802.3bz. | [Plug and Play] Modulization configuration design, support hot-swappable, plug and play. LED indicators for P1, P2, POWER can dynamic feedback link connection state and fault detection to easily monitor network status. Operating Temperature: 0°C to 60°C. | [What You Get] 1x 10GBase SFP+ OEO converter, 1x 10GBase-LR module, 1x 10GBase-T module(30 meters over CAT.6a/7), 1x 5V-1A UL Certified DC Power Adapter, 1x User's Manual. 30-day Money-Back guarantee with 1-Year warranty and lifetime tech support.

Mini size(69*50*25mm), It is nearly 50% smaller than the traditional converter. | Fiber Port: SFP, 850-nm, 550m | RJ-45 Port: 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover. | LED indicators for PWR, FX, 1000, LINK can dynamic feedback link connection state and fault detection to easily monitor network status. | Power Adapter: 5V-1A, UL Certified.

Data Rate: 1.25G/2.5G/5G/10G | Interface: RJ-45; Cable Type: CAT.6a/CAT7 | Reach: up to 30 meters | Wide Compatibility - for Cisco, Fortinet, Ubiquiti, Netgear, D-Link, TP-Link, Linksys, Broadcom, Edge-core, EMC, F5, Meraki, Norkia, QTC, Supermicro, and Other Open Switches.

Data Rate: 1.25G/2.5G/5G/10G | Interface: RJ-45; Cable Type: CAT.6a/CAT7 | Reach: up to 30 meters | Wide Compatibility - for Cisco, Fortinet, Ubiquiti, Netgear, D-Link, TP-Link, Linksys, Broadcom, Edge-core, EMC, F5, Meraki, Norkia, QTC, Supermicro, and Other Open Switches.

【High Performance】Power over Ethernet Splitter splits a PoE network cable from a PoE switch into a separate power and Gigabit Ethernet source, this is ideal for devices that don't support PoE in a PoE environment. | 【12V/1A&10/100/1000Mbps】Split POE signal in 12V DC power and 10/100/1000Mbps Ethernet data; Output Power: 12V/1A, 15.4W, IEEE 802.3af/at compliant power supply equipment (PSE) requirements; Plug Output: Data (1,2)/(3,6)/(4,5)/(7,8). | 【Multiple Protection】Power over Ethernet IEEE 802.3af/at compliant, compatible with DC voltage 44-57V standard POE switches, overvoltage protection, short-circuit protection and overcurrent protection, it is more safe. | 【Widely Application】Eliminates the need for a power supply or for a camera to be located near a power outlet. Available with IP camera, IP phone, wireless AP and other 12V Non-POE devices for home, school, office, park, factory, mall, warehouse, etc. | 【What You Get】Active POE Splitter, 1x Product Manual. Backed by 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support.

1000BASE-LX/LH SFP to LC Optical Gigabit Ethernet Fiber transceiver module, 1.25G Singlemode MiniGBIC SFP(supports OS1/OS2/OS3 fiber cables), Duplex LC connector, 1310nm, DDM, up to 12km. | [Wide Compatibility] Compatible with Cisco GLC-LH-SMD, Meraki MA-SFP-1GB-LX10, Ubiquiti UniFi, Fortinet, Mikrotik, TP-Link TL-SM311LS and Other Open Switches. Widely support Gigabit Ethernet, Fiber Channel, Other Optical Links and other devices. | [Easy to Use] Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gbps SFP ports. SFP MSA Compliant, IEEE 802.3ab Compliant. | [Superior DDM Monitoring] DDM allows you to monitor the critical information concerning the status of the transmitted and received signals of the transceivers in real-time to find out some potential problems. Operating Temperature: 0°C to 70°C. | [What you Get] 1x 100% tested 1000Base-LX module, 3-Year warranty and lifetime tech support. 10Gtek is a manufacturer of transceiver, customized service is available.

1000BASE-SX SFP to LC Optical Gigabit Ethernet Fiber transceiver module, 1.25G Multimode SFP(supports OM1/OM2/OM3/OM4 fiber cables), Duplex LC connector, 850nm, DDM, up to 550m. | [Wide Compatibility] Compatible with Cisco GLC-SX-MMD/GLC-SX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UniFi UF-MM-1G, Mikrotik S-85DLC05D, Fortinet, D-Link, Supermicro, Netgear AGM731F, TP-Link TL-SM311LM, Broadcom, Linksys and Other Open Switches. Widely support Gigabit Ethernet, Fiber Channel, Other Optical Links and other devices. | [Easy to Use] Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gbps SFP ports. SFP MSA Compliant, IEEE 802.3ab Compliant. | [Superior DDM Monitoring] DDM allows you to monitor the critical information concerning the status of the transmitted and received signals of the transceivers in real-time to find out some potential problems. Operating Temperature: 0°C to 70°C. | [What you Get] 2x 100% tested 1000Base-SX modules, 3-Year warranty and lifetime tech support. 10Gtek is a manufacturer of transceiver, customized service is available.

1GBase-CU, 0.5 Meter, pack of 2 | 2-pair differential twinax cable, Passive, EEPROM I2C | Compatible with Cisco SFP-H1GB-CU0.5M, Ubiquiti and more | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test.

1000BASE-LX/LH SFP to LC Optical Gigabit Ethernet Fiber transceiver module, 1.25G Singlemode MiniGBIC SFP(supports OS1/OS2/OS3 fiber cables), Duplex LC connector, 1310nm, DDM, up to 10km. | [Wide Compatibility] Compatible with Cisco GLC-LH-SMD/GLC-LH-SM/SFP-GE-L, Meraki MA-SFP-1GB-LX10, Ubiquiti UniFi, Fortinet, Mikrotik, D-Link, Supermicro, Netgear, TP-Link TL-SM311LS and Other Open Switches. Widely support Gigabit Ethernet, Fiber Channel, Other Optical Links and other devices. | [Easy to Use] Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gbps SFP ports. SFP MSA Compliant, IEEE 802.3ab Compliant. | [Superior DDM Monitoring] DDM allows you to monitor the critical information concerning the status of the transmitted and received signals of the transceivers in real-time to find out some potential problems. Operating Temperature: 0°C to 70°C. | [What you Get] 1x 100% tested 1000Base-LX module, 3-Year warranty and lifetime tech support. 10Gtek is a manufacturer of transceiver, customized service is available.

Data Rate: 10/100/1000M | Interface: RJ-45; Cable Type: CAT.5e | Reach: up to 100 meters transmission over CAT.5e | Wide Compatibility - for Cisco, Cisco Meraki.

10GBase-CU, 0.25 Meter (NOTE: Cable length contains two end connectors.) | 2-pair differential twinax cable, Passive, EEPROM I2C | Compatible with Cisco SFP-H10GB-CU0.25M, Ubiquiti, Fortinet and more | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test

10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.25-Meter(0.82ft), 30AWG | SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing | Compatible with Cisco, Fortinet, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices | In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. And each DAC Cable is individually tested on switches before delivery | Backed by 10Gtek 30 Days Free-returned, 3-Year Free Warranty and Lifetime Technology Support. 10Gtek is a manufacturer of Direct Attach Copper Cable, Customized sevice also is available

10GBase-CU, 0.3 Meter | 2-pair differential twinax cable, Passive, EEPROM I2C | Compatible with Cisco SFP-H10GB-CU0.3M, Ubiquiti, Fortinet and more | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test.

Equipped with original Intel X540 controller chip which supports Intelligent Offloads and make the servers more stable. | Compatible with Windows Server 2003/ 2008/ 2012, Windows7/8/10*/Visa, Linux, ESX/ESXi*. Storage over Ethernet: iSCSI, FCoE, NFS. (Note that this card can be used with Windows 11, but it needs to be manually set up. If you buy it for Windows 11, please contact us for installation guide before using.) | Dual copper RJ45 ports let you connect to Category-6A and up to 100m((Category-6 up to 55 m) for meeting the demands of data center environments. PCI Express* 2.1. 5.0 G T/s X8 Lane is suitable for both PCI-E X8 and PCI-E X16 slots. | With profile bracket and additional low profile bracket that makes it easy to install the card in a small form factor/low profile computer case/server.NOT support hot swaping. | What You Get: 10Gtek 10GbE PCI-E X8 Network Card X540-10G-2T (compare to Intel X540-T2) x1, Low-profile Bracket x1. Backed by 10Gtek 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support.

Equipped with high quality original Intel 82599ES controller which supports I/O virtualization and make the servers more stable. | Compatible with Windows Server 2003/ 2008/ 2012, Windows7/8/10/Visa, Linux, VMware ESX.(Note that this card can be used with Windows 11, but it needs to be manually set up. If you buy it for Windows 11, please contact us for installation guide before using.) | Dual SFP+ ports let you connect to 10 Gigabit SFP+ module/DAC/AOC for meeting the demands of data center environments. PCI-E X8 Lane is suitable for both PCI-E X8 and PCI-E X16 slots. | With profile bracket and additional low profile bracket that makes it easy to install the card in a small form factor/low profile computer case/server.NOT support hot swaping. | What You Get: 10Gtek 10GbE PCI-E X8 Network Card X520-10G-2S (compare to Intel X520-DA2 ) x1, Low-profile Bracket x1. Backed by 10Gtek 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support. PS: Due to the particularity in QNAP/Synology system, for QNAP/Synology users, please contact our customer service before purchase.

Equipped with original Intel X540 controller chip which supports Intelligent Offloads and make the servers more stable. | Compatible with Windows Server 2003/ 2008/ 2012, Windows7/8/Visa, Linux, ESX/ESXi*. (Note that this card can be used with Windows 11, but it needs to be manually set up. If you buy it for Windows 11, please contact us for installation guide before using.) | Single copper RJ45 ports let you connect to Category-5 and up to 100m for meeting the demands of data center environments. PCI Express* 2.1. 5.0 G T/s X8 Lane is suitable for both PCI-E X8 and PCI-E X16 slots. | With profile bracket and additional low profile bracket that makes it easy to install the card in a small form factor/low profile computer case/server.NOT support hot swaping. | What You Get: 10Gtek 10GbE PCI-E X8 Network Card X540-10G-1T (compare to Intel X540-T1) x1, Low-profile Bracket x1. Backed by 10Gtek 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support.

Equipped with original Intel X550-AT2 controller chip which make the servers more stable. | Compatible with Windows Server 2008/ 2019, Linux, FreeBSD* 9 and FreeBSD* 10, UEFI* 2.1, UEFI* 2.3, VMware ESXi 5.1 (Limited Functionality), VMware ESXi 5.5. | Single copper RJ45 ports(100MbE/1GbE/10GbE) let you connect to network cable for meeting the demands of data center environments. PCIe v3.0 (8.0GT/s) (Compatible with 2.0 and 1.1), X4/X8/X16 Lane. | With profile bracket and additional low profile bracket that makes it easy to install the card in a small form factor/low profile computer case/server.NOT support hot swaping. | What You Get: 10Gtek 10GbE X4 PCI-E Network Card X550-10G-1T (compare to Intel X550-T1) x1, Low-profile Bracket x1. Backed by 10Gtek 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support.

Equipped with original Broadcom BCM57810S controller chip which make the servers more stable. | Compatible with Windows Server 2008, Server 2008R2, and HPC Server 2008, 32 and 64-bit Microsoft Windows Server Hyper-V; Red Hat Enterprise Linux 5.7 and 6.1; SLES 10 and 11; VMware 4.1u2 and 5.0u1. | Dual SFP+ ports let you connect to 10 Gigabit SFP+ module/DAC/AOC for meeting the demands of data center environments. PCI Express 2.0 x8 Lane is suitable for both PCI-E X8 and PCI-E X16 slots. | You also can download it from Broadcom website. With profile bracket and additional low profile bracket that makes it easy to install the card in a small form factor/low profile computer case/server.NOT support hot swaping. | What You Get: 10Gtek BCM57810S-DA2 10GbE PCI-E X8 Network Card x1, Low-profile Bracket x1. Backed by 10Gtek 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support.

Data Rate: 10G | Wavelength: 1310-nm | Reach: up to 10 km | Fiber Type: Dual LC single-mode fiber | Wide Compatibility - for Cisco SFP-10G-LR, Meraki MA-SFP-10GB-LR, Fortinet, Ubiquiti UniFi UF-SM-10G, Mikrotik, Netgear, D-Link, TP-Link, Linksys, Broadcom, Edge-core, EMC, F5, Meraki, Norkia, QTC, Supermicro and Other Open Switches.

10GBASE-SR SFP+ to LC Optical 10 Gigabit Ethernet Fiber transceiver module, 10GbE Multimode SFP+(compatible with both 62.5um and 50um LC cables; supports OM1/OM2/OM3/OM4 fiber cables), Duplex LC connector, 850nm, DDM, up to 300m. | [Wide Compatibility] Compatible with Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik, Netgear, D-Link, Supermicro, TP-Link and Other Open Switches. | [Easy to Use] Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in network switch, server, or NIC with SFP+ to a 10 Gigabit fiber channel network with multimode LC for Network Attached Storage(NAS), Storage Area Network(SAN), and High Performance Computing(HPC) applications. | [Durable & Low Power Consumption] Adpot high quality alloy, the shell is strong and wear-resistant; Low power consumption(less than 1.05watt) and low EMI emission design. SFP MSA Compliant, IEEE 802.3ae Compliant. Operating Temperature: 0°C to 70°C. | [What you Get] 10x 100% tested 10GBase-SR modules, 30-day Money-Back guarantee with 3-Year warranty and lifetime tech support. 10Gtek is a manufacturer of transceiver, customized service is available.

10GBASE-SR SFP+ to LC Optical 10 Gigabit Ethernet Fiber transceiver module, 10GbE Multimode SFP+(compatible with both 62.5um and 50um LC cables; supports OM1/OM2/OM3/OM4 fiber cables), Duplex LC connector, 850nm, DDM, up to 300m. | [Wide Compatibility] Compatible with Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik, Netgear, D-Link, Supermicro, TP-Link and Other Open Switches. | [Easy to Use] Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in network switch, server, or NIC with SFP+ to a 10 Gigabit fiber channel network with multimode LC for Network Attached Storage(NAS), Storage Area Network(SAN), and High Performance Computing(HPC) applications. | [Durable & Low Power Consumption] Adopt high quality alloy, the shell is strong and wear-resistant; Low power consumption(less than 1.05watt) and low EMI emission design. SFP MSA Compliant, IEEE 802.3ae Compliant. Operating Temperature: 0°C to 70°C. | [What you Get] 4x 100% tested 10GBase-SR modules, 3-Year warranty and lifetime tech support.

Data Rate: 10G | Interface: RJ-45; Cable Type: CAT.6a/CAT7 | Reach: up to 30 meters | Wide Compatibility - for Cisco, Fortinet, Ubiquiti, Netgear, D-Link, TP-Link, Linksys, Broadcom, Edge-core, EMC, F5, Intel, Meraki, Norkia, QTC, Supermicro, and Other Open Switches.